Concrete Grinding and Crack Repair.

A garage slab mechanically ground, with its cracks marked out for repair: the preparation every epoxy floor we install starts with.

  • Residential
  • Surface preparation
  • Melbourne, VIC

Project at a glance

  • Project typeResidential
  • LocationMelbourne, VIC
  • WorkConcrete grinding & crack repair
  • SpaceGarage floor
  • StageSurface preparation, before coating
  • PurposeA sound, open surface for epoxy to bond to

Project photo

Tap to enlarge

The work

This photo shows a garage slab part-way through preparation. The surface has been mechanically ground back, and the cracks have been marked out so each one can be filled and ground flush before any coating goes on.

Grinding removes old sealers, stains and the weak top layer of the concrete, and opens the surface so the primer can soak in and grip.

Why it matters

Every epoxy job we do starts with concrete grinding and surface preparation. Coating over contamination or untreated cracks is the most common reason epoxy floors lift or peel, so this stage decides how long the finished floor lasts.

Our concrete grinding and surface preparation

How floors like this are installed

Every floor we coat follows the same six steps, adapted to the concrete and the finish chosen.

  1. Consultation & Quote

    We discuss your needs and your space, and give you expert advice on the best flooring solution for your home or business.

  2. Surface Preparation

    We mechanically grind the concrete to remove existing coatings, open the surface and make sure the epoxy bonds for long-term durability.

  3. Priming & Base Coat

    A high-quality primer seals the concrete and improves adhesion, then your chosen epoxy base coat is rolled on evenly in solid colour, flake or metallic.

  4. Flake or Decorative Broadcast (optional)

    Coloured flakes, metallic effects or other decorative elements are added to create the look you want and extra slip resistance.

  5. Clear Top Coat

    A durable clear top coat is applied to seal the finish and protect your floor from wear, UV and chemicals.

  6. Final Inspection & Handover

    We inspect the finished floor to make sure it meets our standards, then walk you through it with care instructions and curing times.

Questions about this floor

Why grind concrete before epoxy?

Grinding removes sealers, stains and the weak top layer of the slab and opens the surface, so the coating bonds to sound concrete instead of sitting on top of contamination.

Can cracked concrete still be coated?

Usually, yes. Cracks are cleaned out, filled and ground flush first. We assess every slab on site and tell you honestly if a crack needs more than a standard repair.

What does preparation cost?

Preparation is included in our epoxy quotes. The amount needed depends on the slab's condition, which is why we ask about it before we quote.

Want a floor like this one?

Tell us about your space and we’ll recommend a system and send a written, itemised quote.

Free quote

Get your free quote.

A few details and we'll come back with a tailored, itemised quote.

Phone or email — whichever suits you. We only need one.

Prefer to talk? Call 0451 057 136 · Use the detailed form